PE 265 Universal Vinyl Adhesive
PE 265 Universal Vinyl Adhesive Flooring Adhesive Penang, Georgetown, Simpang Ampat, Malaysia Supplier, Suppliers, Supply, Supplies | DDS Sales & Marketing Sdn Bhd
PE 265 Universal Vinyl Adhesive
Polymer 265 is a water based acrylic emulsion with excellent platiciser resistance and non-staining properties. It is protected against bio-degradation, withstands normal wet cleaning practices and is suitable for use over underfloor heating installations.
 
Properties
  • Water based acrylic emulsion
  • Hard set adhesive
  • High initial grab ideal for bonding of both supported and unsupported PVC vinyl
  • Non-staining
 
Technical Data:
Appearance : Creamy paste
Solids : 70% (approx.)
Base polymer : Acrylic
Carrier : Water
Flammability : Non flammable
Viscosity : 60, 000 cps (approx.)
Toxicity : Non-toxic
 
For Bonding of:
  • Plasticised vinyl floor and wall coverings
  • PVC backed carpets.
  • Most of the commercial and domestic vinyl sheeting products vinyl composite tiles, hot press tiles and plank vinyl flooring
  • It may be used to install hard to hold carpets and those with PVC backings
Coverage
Approximately 3 – 5 square meters per liter depending upon the condition and absorbency of the substrate and the type of applicator used.
 
Clean Up
Clean tools immediately after use with warm soapy water.
 
Shelf Life
12 – 14 months in unopened containers stored out of direct sunlight.
 
Storage
Recommended to be at temperatures between 5 and 30 degrees Celsius. Keep in well ventilated areas away from sources of heat.
 
Safety & Handling
A Material Safety Data Sheet is available on request
 
Container Sizes
15 litre plastic containers

All product images shown are for illustration purposes only. Actual products may varies in term of size, colour, shades and other relevant characteristics.

Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version